Publication | Scientific Journals | Thermische Vergasung und Gasreinigung
Layer formation on K-feldspar in fluidized bed combustion and gasification of bark and chicken manure
Wagner K, Häggström G, Mauerhofer AM, Kuba M, Skoglund N, Öhman M, Hofbauer H.
Citation: Wagner K, Häggström G, Mauerhofer AM, Kuba M, Skoglund N, Öhman M, Hofbauer H. Layer formation on K-feldspar in fluidized bed combustion and gasification of bark and chicken manure. Biomass and Bioenergy 2019.127:105251.
Understanding layer formation on bed materials used in fluidized beds is a key step for advances in the application of alternative fuels. Layers can be responsible for agglomeration-caused shut-downs but they can also improve the gas composition in fluidized bed gasification. Layers were observed on K-feldspar (KAlSi3O8) impurities originating from the combined heat and power plant Senden which applies the dual fluidized bed (DFB) steam gasification technology. Pure K-feldspar was therefore considered as alternative bed material in DFB steam gasification. Focusing on the interactions between fuel ash and bed material, K-feldspar was tested in combustion and DFB steam gasification atmospheres using different fuels, namely Ca-rich bark, Ca- and P-rich chicken manure, and an admixture of chicken manure to bark. The bed particle layers formed on the bed material surface were characterized using combined scanning electron microscopy and energy-dispersive X-ray spectroscopy; area mappings and line scans were carried out for all samples. The obtained data show no essential influence of operational mode on the layer-formation process. During the combustion and DFB steam gasification of Ca-rich bark, a layer rich in Ca formed while K was diffusing out of the layer. The use of Ca- and P-rich chicken manure inhibited the diffusion of K, and a layer rich in Ca and P formed. The addition of P to bark via chicken manure also changed the underlying layer-formation processes to reflect the same processes as observed for pure chicken manure.