Publication | PhD Thesis |

Modelling and control of large-scale solar thermal systems

Unterberger V

Published 2021

Citation: Unterberger V. Modelling and control of large-scale solar thermal systems. 2021. 212 p.

Abstract

Heat makes up the largest share of energy end-use, accounting for 50% of global final energy consumption in 2018 and contributing to about 40% of global carbon dioxide (CO2) emissions. Of the total heat produced, about 46% was consumed in buildings for space and water heating. Large-scale solar thermal systems provide a highly valuable possibility to increase the share of renewables in heating systems and to reduce carbon dioxide emissions. In this context, the worldwide number of large-scale solar heating systems has increased rapidly in the last couple of years, especially in China and European countries, e.g. in Denmark. This has led to the installation of about 400 large-scale solar thermal systems ( ≥ 350kWth, 500m²) by the end of 2019.
Unlike other heating systems, their main source of power (solar radiation) cannot be manipulated and is subject to changes on a seasonal as well as on a daily basis. That is why control systems play a very important role for the efficient operation of these systems. This thesis therefore focuses on the application of model-based control strategies, and the necessary preliminary work regarding modelling, in order to achieve an efficient control of large-scale solar thermal systems. Consequently, the thesis addresses three important aspects:
In the first main section, models of components of large-scale solar thermal systems are developed and validated. For the most important components (heat exchanger, solar collector and sensible heat storage), two models of different complexity, one simulation-oriented, one control-oriented, are developed. While the simulation-oriented models aim to model the physical behaviour very accurately in order to be used in simulation studies, control-oriented models aim to model the physical behaviour only as accurately as necessary in order to serve as a basis for model-based control strategies. All models are validated with measurement data from a typical solar system, and it is shown that they are sufficiently accurate for their intended purpose. The sum of the models provides a holistic view on all modelling aspects that have to be considered in large-scale solar thermal plants, and serves as a reasonable basis for model-based control strategies and accurate simulation studies of solar systems.
In the second main section, adaptive forecasting methods for the future solar heat production as well as the heat demand are developed and validated with measurement data and using real weather forecasts. These methods are important to most efficiently integrate and operate solar systems by better scheduling heat production, storage and distribution for the near future. In order to be used in real-world applications, the methods are developed with the goal to meet three important practical requirements: simple implementation, automatic adaption to seasonal changes, and wide applicability. The final long-term evaluation for half a year proves that the developed methods can forecast the solar heat production as well as the heat demand very accurately and outperform common forecasting methods, yielding results that are nearly twice as accurate.
In the third main section, model-based control strategies for the high-level as well as for the low-level control of solar thermal systems are developed and validated. For the high-level control an approach is presented which considers future information by using the developed forecasting methods. It achieves higher profits (plus 3 %) and leads to a more stable operation, compared to the existing commercial solution. For the low-level control, model-based control strategies based on the developed models for the heat generation and distribution are presented. The model-based control strategy for the heat generation considers the dynamic behaviour of the collector and especially considers the variable time-delay. This, compared to conventional control strategies, leads to a significantly better control performance in case of fluctuating solar radiation and changing inlet temperatures. The model-based control strategy for the heat distribution follows a modular approach which can be applied for several hydraulic settings, leading to an accurate and independent control of mass flow and temperature, and outperforms state-of-the-art control strategies. For both control levels, care was taken that the applied strategies can be used in real-world applications regarding their mathematical complexity and computational resources required.
In summary, this thesis presents a holistic approach regarding modelling (simulation-oriented models, control-oriented models and adaptive forecasting methods) and control aspects (high-level as well as low-level control) which can help to improve the efficiency of large-scale solar thermal plants on various levels, making them more competitive, and is furthermore essential for a successful integration of these plants in larger energy systems.


Filter

Contact Us

We invite you to contact our office under office@best-research.eu or a member of our personnel directly from this website. Fast and simple.

To Our Team Page